At times, users (especially newbies) face common difficulties like Netgear router login not working, unable to setup or reset the device, etc.

If you are also one of them, then this article could be a great help to you. Here, in this piece of writing, we will not only guide you on how to fix Netgear router not working issue but also explain steps to set up and reset the device. Let's get the ball rolling, shall we?

First of all, let us make your Netgear router up and running.

Fix: Netgear Router Not Working Issue

• Firstly, ensure that your Netgear router is plugged in properly and receiving a steady power supply.
• Ensure that your router is placed near your modem and at the center-most area in your home.
• Make sure that your router and modem are not placed too close or far from each other.
• Be sure that your modem and Netgear device are properly connected.

Still Netgear router not working? Consider power cycling or rebooting your Netgear router. To initiate the process, do the following!

• Unplug your router and before that disconnect it from your modem.
• Wait for some time and then plug the device back in.
• Wait for the router's power LED to become stable.
• Now, try to access the Netgear Genie login page using 192.168.1.1 IP and see if the power cycling process helps your router to work smoothly or not.

On the off chance if the troubleshooting tips listed above don't help youresolve the issue, without much delay – head over to the next fix. Keep scrolling down!

Reset Netgear Router

Yes, you read it absolutely right! Although the reset process can fix the Netgear router not working issue , it will delete all the settings on your device. So, you must take the back up of the router's settings so that you won't face any issues while configuring it again.

Here's how to reset Netgear router:

• Make sure that your Netgear router is plugged in properly. Keep this in mind - the LEDs on your router must be stable. On the off chance if you see any LED blinking for longer than expected, choose a different socket to plug in your Netgear router.
• Also, ensure to disconnect all the devices that are connected to your Netgear router.
• Then, locate the Netgear router reset hole.
• Press and release it.

Fab! Your Netgear router resets successfully.

Now that your router has set to default settings, you can take the plunge to set it up again.

Set up Netgear Router

To set up Netgear router, walk through the steps highlighted below:

• Plug in your Netgear router and connect it to your modem using an Ethernet cable.
• Wait for a few minutes. Allow the power LED on your router to become stable.
• Open a web browser on your PC or laptop. Make sure that you are using an up-to-date internet browser.
• Drag the mouse cursor to the web browser bar and type routerlogin.net or 192.168.1.1 IP without typos.
• Press Enter.
• Netgear router login page displays.
• Type in the router's default admin details carefully and click on Log In.
• Netgear Genie setup wizard displays.
• Follow the on-screen instructions and set up Netgear router with ease

Hopefully, setting up Netgear router have helped you in fixing the issue. Please feel free to share your feedback with your fellow readers. Apart from that – if you have any concern or need assistance to fix Netgear router not working issue, without hesitation – drop your queries into the comment box.